CDS 110b: Linear Quadratic Regulators

CDS 110b

Schedule

Project

Course Text

This lecture provides a brief derivation of the linear quadratic regulator (LQR) and describes how to design an LQR-based compensator. The use of integral feedback to eliminate steady state error is also described.

• Lecture Presentation
• Homework 3 (due 30 Jan 08): TBD

References and Further Reading

• Lewis and Syrmos, Section 3.4 - this follows the derivation in the notes above. I am not putting in a scan of this chapter since the course text is available, but you are free to have a look via Google Books.
• Friedland, Ch 9 - the derivation of the LQR controller is done differently, so it gives an alternate approach.

Frequently Asked Questions

Q: What do you mean by penalizing something, from Q>=0 "penalizes" state error?

According to the form of the quadratic cost function $J$, there are three quadratic terms such as $x^{T}Qx$, $u^{T}Ru$, and $x(T)^{T}P_{1}x(T)$. When $Q\geq 0$ and if $Q$ is relative big, the value of $x$ will have bigger contribution to the value of $J$. In order to keep $J$ small, $x$ must be relatively small. So selecting a big $Q$ can keep $x$ in small value regions. This is what the "penalizing" means.

So in the optimal control design, the relative values of $Q$, $R$, and $P_{1}$ represent how important $X$, $U$, and $X(T)$ are in the designer's concerns.

Zhipu Jin,13 Jan 03