Difference between revisions of "HW 7 Prob 1 Comments"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
For Problem 1c you need to design | For Problem 1c you need to design only ONE controller (ignore the plural 'controllers' in the HW wording for 1c). The controller should be designed using the Ziegler-Nichols rules for the step response method. | ||
designed using the Ziegler-Nichols rules for the step response method. | You need to plot the step response and the frequency response (bode plot) of your final design (i.e., the closed-loop system) You also need to compute the gain & phase margins of the loop transfer function L. | ||
You need to plot the step response | |||
response of | |||
The Ziegler-Nichols step response method rules are found in Table 10.1a on pg. 301. You must draw the steepest tangent line to the step response of the plant until it crosses the two axes. You can then approximate the values for "a" and "tao" by visual or numerical approximation. You might need to change the y-axis range of the step response plot to determine the y-intercept. | |||
As usual for all HW questions, give a title to your plots, label axes, and turn in code along with your plots. | As usual for all HW questions, give a title to your plots, label axes, and turn in code along with your plots. | ||
--[[User:Soto|Soto]] 14:20, 25 November 2007 (PST) | --[[User:Soto|Soto]] 14:20, 25 November 2007 (PST) | ||
[[Category: CDS 101/110 FAQ - Homework 7]] | [[Category: CDS 101/110 FAQ - Homework 7]] | ||
[[Category: CDS 101/110 FAQ - Homework 7, Fall 2007]] | [[Category: CDS 101/110 FAQ - Homework 7, Fall 2007]] | ||
Latest revision as of 17:51, 26 November 2007
For Problem 1c you need to design only ONE controller (ignore the plural 'controllers' in the HW wording for 1c). The controller should be designed using the Ziegler-Nichols rules for the step response method. You need to plot the step response and the frequency response (bode plot) of your final design (i.e., the closed-loop system) You also need to compute the gain & phase margins of the loop transfer function L.
The Ziegler-Nichols step response method rules are found in Table 10.1a on pg. 301. You must draw the steepest tangent line to the step response of the plant until it crosses the two axes. You can then approximate the values for "a" and "tao" by visual or numerical approximation. You might need to change the y-axis range of the step response plot to determine the y-intercept.
As usual for all HW questions, give a title to your plots, label axes, and turn in code along with your plots. --Soto 14:20, 25 November 2007 (PST)
