Difference between revisions of "CDS 101/110a, Fall 2006"
Line 84:  Line 84:  
* B. Friedland, ''Control System Design: An Introduction to StateSpace Methods'', McGrawHill, 1986.  * B. Friedland, ''Control System Design: An Introduction to StateSpace Methods'', McGrawHill, 1986.  
* G. F. Franklin, J. D. Powell, and A. EmamiNaeni, ''Feedback Control of Dynamic Systems, AddisonWesley  * G. F. Franklin, J. D. Powell, and A. EmamiNaeni, ''Feedback Control of Dynamic Systems'', AddisonWesley, 2002.  
* N. E. Leonard and W. S. Levine, ''Using Matlab to Analyze and Design Control Systems'', Benjamin/Cummings, 1992.  * N. E. Leonard and W. S. Levine, ''Using Matlab to Analyze and Design Control Systems'', Benjamin/Cummings, 1992.  
* B. C. Kuo, ''Automatic Control Systems'', PrenticeHall, 1995.  * B. C. Kuo, ''Automatic Control Systems'', PrenticeHall, 1995.  
* S. Strogatz, ''Nonlinear dynamics and Chaos: with applications in physics, biology, chemistry, and engineering'', AddisonWesley, 1994.  
=== Course Schedule ===  === Course Schedule === 
Revision as of 13:44, 29 September 2006
See current course homepage to find most recent page available. 
CDS 101/110a  Schedule  Recitations  FAQ  AM06 (errata) 

This is the homepage for CDS 101 (Analysis and Design of Feedback Systems) and CDS 110 (Introduction to Control Theory) for Fall 2006.
Instructor

Teaching Assistants (cds110tas@cds)

Announcements
Archive 
 25 Sep 06: CDS 101/110, Week 1  Introduction to Feedback and Control
 27 Aug 06: web page created
Course Syllabus
CDS 101/110 provides an introduction to feedback and control in physical, biological, engineering, and information sciences. Basic principles of feedback and its use as a tool for altering the dynamics of systems and managing uncertainty. Key themes throughout the course will include input/output response, modeling and model reduction, linear versus nonlinear models, and local versus global behavior.
CDS 101 is a 6 unit (204) class intended for advanced students in science and engineering who are interested in the principles and tools of feedback control, but not the analytical techniques for design and synthesis of control systems. CDS 110 is a 9 unit class (306) that provides a traditional first course in control for engineers and applied scientists. It assumes a stronger mathematical background, including working knowledge of linear algebra and ODEs. Familiarity with complex variables (Laplace transforms, residue theory) is helpful but not required.
Grading
The final grade will be based on homework sets, a midterm exam, and a final exam:
 Homework (50%): Homework sets will be handed out weekly and due on Mondays by 5 pm to the box outside of 109 Steele. Late homework will not be accepted without prior permission from the instructor.
 Midterm exam (20%): A midterm exam will be handed out at the beginning of midterms week (25 Oct) and due at the end of the midterm examination period (31 Oct). The midterm exam will be open book and computers will be allowed (though not required).
 Final exam (30%): The final exam will be handed out on the last day of class (1 Dec) and due at the end of finals week. It will be an open book exam and computers will be allowed (though not required).
Collaboration Policy
Collaboration on homework assignments is encouraged. You may consult outside reference materials, other students, the TA, or the instructor, but you cannot consult homework solutions from prior years and you must cite any use of material from outside references. All solutions that are handed in should be written up individually and should reflect your own understanding of the subject matter at the time of writing. MATLAB scripts and plots are considered part of your writeup and should be done individually (you can share ideas, but not code).
No collaboration is allowed on the midterm or final exams.
Course Text and References
The primary course text is Feedback Systems: An Introduction for Scientists and Engineers by Åström and Murray (2006). This book is available in the Caltech bookstore and via download from the companion web site. The following additional references may also be useful:
 A. D. Lewis, A Mathematical Approach to Classical Control, 2003. Online access.
In addition to the books above, the textbooks below may also be useful. Most of these books have been reserved for the course in the Sherman Fairchild Library. They can also be ordered from online booksellers.
 B. Friedland, Control System Design: An Introduction to StateSpace Methods, McGrawHill, 1986.
 G. F. Franklin, J. D. Powell, and A. EmamiNaeni, Feedback Control of Dynamic Systems, AddisonWesley, 2002.
 N. E. Leonard and W. S. Levine, Using Matlab to Analyze and Design Control Systems, Benjamin/Cummings, 1992.
 B. C. Kuo, Automatic Control Systems, PrenticeHall, 1995.
 S. Strogatz, Nonlinear dynamics and Chaos: with applications in physics, biology, chemistry, and engineering, AddisonWesley, 1994.
Course Schedule
The course is scheduled for MWF 23 pm in 74 Jorgenson. CDS 101 meets on Monday and Friday only. A detailed course schedule is available on the course schedule page.
Course Project
Students interested in the implementation of control systems may opt to do a course project in lieu of the midterm and final exams. The course project will involve implementing control algorithms on a working application. For 2006, the experiment will be control of an autonomous road vehicle, Alice.
The following work must be performed as part of the class project:
 Midterm report: 20%
By midterm, all students should implement and test a state space controller on the experimental system. A report describing the control design and experimental results is due no later than 5 pm on the last day of the midterm examination period. The report should include a description of the (nonlinear) model for the system, an analysis and design of a control law based on the linearization of that model, and a comparison between simulation and experimental results on the system. For 2006, students will implement a longitudinal control law that controls the velocity of the vehicle.
 Final report: 30%
By the end of the course, students should longitudinal and lateral controller on the experimental system. A presentation and report describing the control design and experimental results will be given in lieu of the final. The final presentation will be made after the end of classes and the report is due no later than 5 pm on the last day of finals. The report should build on the report submitted at midterms and should include a design, analysis and demonstration of the full system. A dynamic compensator (eg, PID) must be part of the design.
A special set of lectures on control implementation will be given for students interested in pursuing the course project.