SURF 2019: Geometry of Control-Invariant Sets: Difference between revisions

From Murray Wiki
Jump to navigationJump to search
VisualWikitext
(Created page with "The concept of a ''control-invariant'' set---a set <math>X</math> with the property that a controller can make the state <math>x(t)</math> of a system remain inside of <math>X...")
 
No edit summary
Line 1: Line 1:
The concept of a ''control-invariant'' set---a set <math>X</math> with the property that a controller can make the state <math>x(t)</math> of a system remain inside of <math>X</math> for all positive <math>t</math> ---is closely connected with safety and reliability of engineered systems [1]. Unfortunately, analytical expressions for control-invariant sets are not known for many important systems, and are also hard to compute numerically in high dimensions.  
The concept of a ''control-invariant'' set---a set <math>X</math> with the property that a controller can make the state <math>x(t)</math> of a system remain inside of <math>X</math> for all positive <math>t</math> ---is closely connected with safety and reliability of engineered systems [1]. Invariant sets can be used to construct controllers that make systems such as quadrotors avoid crashes [2]. Unfortunately, analytical expressions for control-invariant sets are not known for many important systems, and are also hard to compute numerically in high dimensions.  


[[File:Example.jpg]]
[[File:Double_int.png]] [[File:Triple_int.png]]


Some of the most fundamental dynamical systems are linear <math>n</math>-order integrators. For <math>n</math> = 2 a closed-form expression of the maximal control-invariant set contained inside the unite hypercube is known [2. eq. (53)], but for higher orders of <math>n</math> only numerical approaches are available. The Figure above shows numerical approximations for <math>n</math> equal to 2 and <math>n</math> equal to 3. The objective of this project is to investigate geometrical properties of these sets via a combination of analytical and numerical techniques. In particular,
Some of the most fundamental dynamical systems are linear <math>n</math>-order integrators. For <math>n</math> = 2 a closed-form expression of the maximal control-invariant set contained inside the unit hypercube is known [3. eq. (53)], but for higher orders of <math>n</math> only numerical approaches are available. The figures above show numerical approximations for <math>n</math> equal to 2 and <math>n</math> equal to 3. The objective of this project is to investigate geometrical properties of control-invariant sets via a combination of analytical and numerical techniques. In particular,


* Search for closed-form expressions or cheap-to-evaluate algorithms that characterize control-invariant sets of for n larger than 3.
* Search for closed-form expressions or cheap-to-evaluate algorithms that characterize control-invariant sets for n > 2.
* Investigate incremental algorithms, i.e., if the set for $n$ is known, can we characterize the set for $n+1$?
* Investigate incremental algorithms, i.e., if the set for n is known, can we characterize the set for n+1?
* Stretch goal: generalize the incremental ideas to differential extensions of general systems such as the quadrotor dynamics on $SE(3)$.
* Stretch goal: generalize the incremental ideas to differential extensions of general systems such as the quadrotor dynamics on SE(3).


Familiarity with the following topics is desirable:
Familiarity with the following topics is desirable:
Line 21: Line 21:
[1] Blanchini, F. (1999). Set invariance in control. Automatica, 35(11), 1747–1767. https://doi.org/10.1016/S0005-1098(99)00113-2
[1] Blanchini, F. (1999). Set invariance in control. Automatica, 35(11), 1747–1767. https://doi.org/10.1016/S0005-1098(99)00113-2


[2] Ames, A. D., Xu, X., Grizzle, J. W., & Tabuada, P. (2017). Control Barrier Function Based Quadratic Programs for Safety Critical Systems. IEEE Transactions on Automatic Control, 62(8), 3861–3876. https://doi.org/10.1109/TAC.2016.2638961
[2] https://www.youtube.com/watch?v=rK9oyqccMJw
 
[3] Ames, A. D., Xu, X., Grizzle, J. W., & Tabuada, P. (2017). Control Barrier Function Based Quadratic Programs for Safety Critical Systems. IEEE Transactions on Automatic Control, 62(8), 3861–3876. https://doi.org/10.1109/TAC.2016.2638961

Revision as of 00:18, 28 November 2018

The concept of a control-invariant set---a set with the property that a controller can make the state of a system remain inside of for all positive ---is closely connected with safety and reliability of engineered systems [1]. Invariant sets can be used to construct controllers that make systems such as quadrotors avoid crashes [2]. Unfortunately, analytical expressions for control-invariant sets are not known for many important systems, and are also hard to compute numerically in high dimensions.

Some of the most fundamental dynamical systems are linear -order integrators. For = 2 a closed-form expression of the maximal control-invariant set contained inside the unit hypercube is known [3. eq. (53)], but for higher orders of only numerical approaches are available. The figures above show numerical approximations for equal to 2 and equal to 3. The objective of this project is to investigate geometrical properties of control-invariant sets via a combination of analytical and numerical techniques. In particular,

  • Search for closed-form expressions or cheap-to-evaluate algorithms that characterize control-invariant sets for n > 2.
  • Investigate incremental algorithms, i.e., if the set for n is known, can we characterize the set for n+1?
  • Stretch goal: generalize the incremental ideas to differential extensions of general systems such as the quadrotor dynamics on SE(3).

Familiarity with the following topics is desirable:

  • Advanced knowledge of linear ordinary differential equations.
  • Optimization.
  • Programming in Matlab and/or Python (the figures above were created with code from https://github.com/pettni/pcis).

References

[1] Blanchini, F. (1999). Set invariance in control. Automatica, 35(11), 1747–1767. https://doi.org/10.1016/S0005-1098(99)00113-2

[2] https://www.youtube.com/watch?v=rK9oyqccMJw

[3] Ames, A. D., Xu, X., Grizzle, J. W., & Tabuada, P. (2017). Control Barrier Function Based Quadratic Programs for Safety Critical Systems. IEEE Transactions on Automatic Control, 62(8), 3861–3876. https://doi.org/10.1109/TAC.2016.2638961

Retrieved from "https://murray.cds.caltech.edu/index.php?title=SURF_2019:_Geometry_of_Control-Invariant_Sets&oldid=22249"