Murray Wiki - User contributions [en]

SURF discussions, Jan 2018

2018-01-22T20:59:04Z

Wpoole: /* 24 Jan (Wed) */

Slots for talking with applicants and co-mentors about SURF projects. Please sign up for one of the slots below. All times are PST. __NOTOC__

In preparation for our conversation, please do the following:
* SURF students should work with their co-mentors to find a time the meeting/Skype call. (For Skype calls, co-mentors should initiate.)
* Please make sure you have read the material in the description of your project, so that you are prepared to talk about what the project is about and we can narrow in on the key ideas that will be the basis of your proposal
* Please take a look at the [[SURF GOTChA chart]] page, which is the format that we will use for the first iteration of your project proposal.

{| border=1
|- valign=top
| width=30% |
==== 23 Jan (Tue) ====
* 1:00 pm PST: open
<hr>
* 4:00 pm PST: Andrey/ Sanjana
* 4:30 pm PST: open
<hr>
* 6:00 pm PST: Andy/Emanuel
* 6:30 pm PST: open
| width=30% |

==== 24 Jan (Wed) ====
* 7:30 am PST: William/Sannat
* 8:00 am PST: Rory/Elin
<hr>
*12:15 pm PST: Filip / Jin
*12:45 pm PST: open (if needed)
<hr>
* 4:30 pm PST: Reed / Leah
* 5:00 pm PST: open
* 5:30 pm PST: open
|}

The agenda for the phone call is (roughly):

# Description of the basic idea behind the project (based on applicant's understanding)
# Discussion about approaches, things to read, variations to consider, etc
# Discussion of the format of the proposal
# Questions and discussion about the process

SURF 2018: Resource Usage in TX-TL

2017-12-11T22:00:20Z

Wpoole:

'''[[SURF 2018|2018 SURF]]: project description'''
* Mentor: Richard M. Murray
* Co-mentor: William Poole

The goal of this project is to quantify how resources (NTPs, and Amino acids) are depleted during transcription and translation in cell free extract. First some background; we work with cell free extracts which is a purified lysate made from E. coli which we refer to as TX-TL. These extracts are very useful for prototyping and characterizing synthetic biological circuits. When genes are added to this extract they are transcribed to mRNA which are translated into proteins, giving rise to life-like biocircuit functionality. However, TX-TL has a limited lifetime determined in part by the depletion of energetic molecules (namely nucleic acids, amino acids, and ATP) and build up of waste products. The goal of this project is to mathematically model and experimentally characterize resource utilization in TX-TL. Specifically, we would like to build an experimental system to connect a TX-TL reaction to a reservoir of energetic molecules. By varying the size of this reservoir, the depletion rate of fuel molecules will be experimentally controllable allowing for different models of this process to be experimentally tested.

'''Background / Skills: '''

Potential SURFs should have taken courses in basic chemistry and biology, including at least one class with a laboratory component. Additionally the ability to simulate ordinary differential equations or models in Python/MATLAB will be necessary. Finally, a large component of this project will be hands-on work to design and construct the reservoir system, so experience building things will be helpful.

'''Relevant References:'''

The All E. coli TX-TL Toolbox 2.0: A Platform for Cell-Free Synthetic Biology: https://www.ncbi.nlm.nih.gov/pubmed/26818434

Linear DNA for Rapid Prototyping of Synthetic Biological Circuits in an Escherichia coli Based TX-TL Cell-Free System:
http://pubs.acs.org/doi/abs/10.1021/sb400131a

Gene Circuit Performance Characterization and Resource Usage in a Cell-Free “Breadboard”: http://pubs.acs.org/doi/10.1021/sb400203p

Effect of the ATP level on the overall protein biosynthesis rate in a wheat germ cell-free system: https://www.ncbi.nlm.nih.gov/pubmed/8620031

SURF 2018: Resource Usage in TX-TL

2017-12-11T21:58:41Z

Wpoole:

'''[[SURF 2018|2018 SURF]]: project description'''
* Mentor: Richard M. Murray
* Co-mentor: William Poole

The goal of this project is to quantify how resources (NTPs, and Amino acids) are depleted during transcription and translation in cell free extract. First some background; we work with cell free extracts which is a purified lysate made from E. coli which we refer to as TX-TL. These extracts are very useful for prototyping and characterizing synthetic biological circuits. When genes are added to this extract they are transcribed to mRNA which are translated into proteins, giving rise to life-like biocircuit functionality. However, TX-TL has a limited lifetime determined in part by the depletion of energetic molecules (namely nucleic acids, amino acids, and ATP) and build up of waste products. The goal of this project is to mathematically model and experimentally characterize resource utilization in TX-TL. Specifically, we would like to build an experimental system to connect a TX-TL reaction to a reservoir of energetic molecules. By varying the size of this reservoir, the depletion rate of fuel molecules will be experimentally controllable allowing for different models of this process to be experimentally tested.

'''Background / Skills '''

Potential SURFs should have taken courses in basic chemistry and biology, including at least one class with a laboratory component. Additionally the ability to simulate ordinary differential equations or models in Python/MATLAB will be necessary. Finally, a large component of this project will be hands-on-experiment work to design and construct the reservoir system, so experience building things will be helpful.

'''Relevant References:'''

The All E. coli TX-TL Toolbox 2.0: A Platform for Cell-Free Synthetic Biology: https://www.ncbi.nlm.nih.gov/pubmed/26818434

Linear DNA for Rapid Prototyping of Synthetic Biological Circuits in an Escherichia coli Based TX-TL Cell-Free System:
http://pubs.acs.org/doi/abs/10.1021/sb400131a

Gene Circuit Performance Characterization and Resource Usage in a Cell-Free “Breadboard”: http://pubs.acs.org/doi/10.1021/sb400203p

Effect of the ATP level on the overall protein biosynthesis rate in a wheat germ cell-free system: https://www.ncbi.nlm.nih.gov/pubmed/8620031

SURF 2018: Resource Usage in TX-TL

2017-12-08T20:13:58Z

Wpoole:

The goal of this project is to quantify how resources (NTPs, and Amino acids) are depleted during transcription and translation in cell free extract. First some background; we work with cell free extracts which is a purified lysate made from E. coli which we refer to as TX-TL. These extracts are very useful for prototyping and characterizing synthetic biological circuits. When genes are added to this extract they are transcribed to mRNA which are translated into proteins, giving rise to life-like biocircuit functionality. However, TX-TL has a limited lifetime determined in part by the depletion of energetic molecules (namely nucleic acids, amino acids, and ATP) and build up of waste products. The goal of this project is to mathematically model and experimentally characterize resource utilization in TX-TL. Specifically, we would like to build an experimental system to connect a TX-TL reaction to a reservoir of energetic molecules. By varying the size of this reservoir, the depletion rate of fuel molecules will be experimentally controllable allowing for different models of this process to be experimentally tested.

'''Relevant References:'''

The All E. coli TX-TL Toolbox 2.0: A Platform for Cell-Free Synthetic Biology: https://www.ncbi.nlm.nih.gov/pubmed/26818434

Linear DNA for Rapid Prototyping of Synthetic Biological Circuits in an Escherichia coli Based TX-TL Cell-Free System:
http://pubs.acs.org/doi/abs/10.1021/sb400131a

Gene Circuit Performance Characterization and Resource Usage in a Cell-Free “Breadboard”: http://pubs.acs.org/doi/10.1021/sb400203p

Effect of the ATP level on the overall protein biosynthesis rate in a wheat germ cell-free system: https://www.ncbi.nlm.nih.gov/pubmed/8620031

SURF 2018: Resource Usage in TX-TL

2017-12-08T20:12:59Z

Wpoole:

The goal of this project is to quantify how resources (NTPs, and Amino acids) are depleted during transcription and translation in cell free extract. First some background; we work with cell free extracts which is a purified lysate made from E. coli which we refer to as TX-TL. These extracts are very useful for prototyping and characterizing synthetic biological circuits. When genes are added to this extract they are transcribed to mRNA which are translated into proteins, giving rise to life-like biocircuit functionality. However, TX-TL has a limited lifetime determined in part by the depletion of energetic molecules (namely nucleic acids, amino acids, and ATP) and build up of waste products. The goal of this project is to mathematically model and experimentally characterize resource utilization in TX-TL. Specifically, we would like to build an experimental system to connect a TX-TL reaction to a reservoir of energetic molecules. By varying the size of this reservoir, the depletion rate of fuel molecules will be experimentally controllable allowing for different models of this process to be experimentally tested.

Relevant References:
The All E. coli TX-TL Toolbox 2.0: A Platform for Cell-Free Synthetic Biology: https://www.ncbi.nlm.nih.gov/pubmed/26818434

Linear DNA for Rapid Prototyping of Synthetic Biological Circuits in an Escherichia coli Based TX-TL Cell-Free System:
http://pubs.acs.org/doi/abs/10.1021/sb400131a

Gene Circuit Performance Characterization and Resource Usage in a Cell-Free “Breadboard”: http://pubs.acs.org/doi/10.1021/sb400203p

Effect of the ATP level on the overall protein biosynthesis rate in a wheat germ cell-free system: https://www.ncbi.nlm.nih.gov/pubmed/8620031

SURF 2018: Resource Usage in TX-TL

2017-12-08T20:12:39Z

Wpoole:

The goal of this project is to quantify how resources (NTPs, and Amino acids) are depleted during transcription and translation in cell free extract. First some background; we work with cell free extracts which is a purified lysate made from E. coli which we refer to as TX-TL. These extracts are very useful for prototyping and characterizing synthetic biological circuits. When genes are added to this extract they are transcribed to mRNA which are translated into proteins, giving rise to life-like biocircuit functionality. However, TX-TL has a limited lifetime determined in part by the depletion of energetic molecules (namely nucleic acids, amino acids, and ATP) and build up of waste products. The goal of this project is to mathematically model and experimentally characterize resource utilization in TX-TL. Specifically, we would like to build an experimental system to connect a TX-TL reaction to a reservoir of energetic molecules. By varying the size of this reservoir, the depletion rate of fuel molecules will be experimentally controllable allowing for different models of this process to be experimentally tested.

Relevant References:
The All E. coli TX-TL Toolbox 2.0: A Platform for Cell-Free Synthetic Biology: https://www.ncbi.nlm.nih.gov/pubmed/26818434
Linear DNA for Rapid Prototyping of Synthetic Biological Circuits in an Escherichia coli Based TX-TL Cell-Free System: http://pubs.acs.org/doi/abs/10.1021/sb400131a
Gene Circuit Performance Characterization and Resource Usage in a Cell-Free “Breadboard”: http://pubs.acs.org/doi/10.1021/sb400203p
Effect of the ATP level on the overall protein biosynthesis rate in a wheat germ cell-free system: https://www.ncbi.nlm.nih.gov/pubmed/8620031

SURF 2018: Resource Usage in TX-TL

2017-12-08T20:07:29Z

Wpoole: SURF 2018: Resource Usage in TXTL

The goal of this project is to quantify how resources (NTPs, and Amino acids) are depleted during transcription and translation in cell free extract. First some background; we work with cell free extracts which is a purified lysate made from E. coli which we refer to as TX-TL. These extracts are very useful for prototyping and characterizing synthetic biological circuits. When genes are added to this extract they are transcribed to mRNA which are translated into proteins, giving rise to life-like biocircuit functionality. However, TX-TL has a limited lifetime determined in part by the depletion of energetic molecules (namely nucleic acids, amino acids, and ATP) and build up of waste products. The goal of this project is to mathematically model and experimentally characterize resource utilization in TX-TL. Specifically, we would like to build an experimental system to connect a TX-TL reaction to a reservoir of energetic molecules. By varying the size of this reservoir, the depletion rate of fuel molecules will be experimentally controllable allowing for different models of this process to be experimentally tested.

Relevant References:
<a href="https://www.ncbi.nlm.nih.gov/pubmed/26818434">The All E. coli TX-TL Toolbox 2.0: A Platform for Cell-Free Synthetic Biology.</a>
<a href="http://pubs.acs.org/doi/abs/10.1021/sb400131a">Linear DNA for Rapid Prototyping of Synthetic Biological Circuits in an Escherichia coli Based TX-TL Cell-Free System.</a>
<a href="http://pubs.acs.org/doi/10.1021/sb400203p">Gene Circuit Performance Characterization and Resource Usage in a Cell-Free “Breadboard”.</a>
<a href="https://www.ncbi.nlm.nih.gov/pubmed/8620031">Effect of the ATP level on the overall protein biosynthesis rate in a wheat germ cell-free system..</a>

May 2017 meeting schedule

2017-05-11T17:19:03Z

Wpoole: /* 15 May (Mon) */

Richard will be in town several different times in May. Please sign up for a time to meet below. Please note that these are likely the last "sabbatical" meetings until Richard returns to Pasadena in early July. __NOTOC__

{| border=1 width=100%
|- valign=top
| width=33% |
| width=33% |
==== 15 May (Mon) ====
* 9:30 am: William
* 10:15 am: Open
* 11:00 am: Faculty meeting
* 11:30 am: Andy
* 12:15 pm: Lunch
* 1:30 pm: Sam
* 2:15 pm: Reed
* 3:00 pm: Vipul
* 3:45 pm: Break
* 4:00 pm: Namita
* 4:45 pm: Ania
* 5:30 pm: Anandh
* 6:15 pm: Done for the day

| width=33% |

==== 16 May (Tue)====
* 9:30 am: Yong
* 10:15 am: Tung
* 11:00 am: Faculty meeting
* 12:00 pm: Lunch
* 1:30 pm: Depart
* 12:00 pm: Lunch
* 1:30 pm: Depart

|- valign=top
| width=33% |

====21 May (Sun) ====
* 1:45 pm: Sofie
* 2:30 pm: Ioannis
* 3:15 pm: Karena
* 4:00 pm: Break
* 4:15 pm: Rory
* 5:00 pm: Open
* 5:45 pm: Open
* 6:30 pm: Done for the day

| width=33% |

==== 22 May (Mon) ====
* 10:15 am: Mark
* 11:00 am: Cindy
* 11:45 am: Lunch
* 12:00 pm: DARPA BioCon meeting
* 2:00 pm: Swati + Reed
* 2:45 pm: Off campus
* 4:15 pm: James
* 5:00 pm: Non-Caltech meetings
* 6:30 pm: Done for the day

| width=33% |

==== 23 May (Tue) ====
* 9:30 am: Faculty discussion
* 10:30 am: Hold (Susan)
* 11:30 am: Lunch
* 12:00 pm: Telecon
* 1:00 pm: Anu thesis defense
* 3:00 pm: Terri (?)
* 3:30 pm: Depart

|- valign=top
| width=33% |

====28 May (Sun) ====
* 1:45 pm: Richard C
* 2:30 pm: George
* 3:15 pm: Andy
* 4:00 pm: Done for the day
| width=33% |

====29 May (Mon) ====
* 1:45 pm: Open (if needed)
* 2:30 pm: Open (if needed)
* 3:15 pm: Sumanth
* 4:00 pm: Done for the day
| width=33% |

==== 30 May (Tue) ====
* 9:30 am: Shan
* 10:15 am: Shaobin
* 11:00 am: Stepan seminar
* 12:00 pm: Lunch
* 1:30 pm: Namita
* 2:15 pm: Andrey
* 3:00 pm: Depart
|}

Group Schedule, Spring 2017

2017-05-08T17:59:21Z

Wpoole: /* Week 10: 5 Jun - 9 Jun */

This page contains information about various upcoming events that are of interest to the group. __NOTOC__
{| width=60%
|- valign=top
| width=50% |
* {{RMM public schedule|Richard's calendar (travel)}}
| width=50% |
* [[Group Schedule, Winter 2017]]
|}

The schedule for group and subgroup meetings is given below. Contact Anandh if you need to change the schedule. Unless otherwise noted, here are the locations of the meetings:

:{| width=100%
|- valign=top
| width=30% |
* Group meetings - 213 ANB
| width=30% |
* Biocircuits subgroup - Keck 111
| width=30% |
* NCS subgroup - 243 ANB
|}

{| width=100% border=1

|- valign=top
| width=25% |
=== Week 1: 3 Apr - 7 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* Leo Green
* Ania Baetica

| width=25% |

=== Week 2: 10 Apr - 14 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* Vipul Singhal
* George Artavanis

'''Biocircuits: Wed, 11a-12p'''
* Lab cleanup

| width=25% |

=== Week 3: 17 Apr - 21 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* Yong Wu
* Mark Prator

'''DARPA Biocon: Wed, 12p-2p'''

|- valign=top
| width=25% |

=== Week 4: 24 Apr - 28 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* James Parkin
* Shaobin Guo (Pre-defense talk)

| width=25% |

=== Week 5: 1 May - 5 May ===
'''Biocircuits: Mon, 10a-12p'''
* Sam Clamons
* Andrey Shur

| width=25% |

=== Week 6: 8 May - 12 May===
'''Biocircuits: Mon, 10a-12p'''
* Anandh Swaminathan
* Cindy Ren

|- valign=top
| width=25% |

=== Week 7: 15 May - 19 May ===
'''Biocircuits: Mon, 10a-12p'''
* Reed McCardell
| width=25% |

=== Week 8: 22 May - 26 May ===
* RMM in town, no group meeting

'''DARPA Biocon: Wed, 12p-2p'''

| width=25% |

=== Week 9: 29 May - 2 Jun ===
'''Happy Memorial Day!'''

|- valign=top
| width=25% |

=== Week 10: 5 Jun - 9 Jun ===
'''Biocircuits: Mon, 10a-12p'''
* William Poole
* Andy Halleran

| width=25% |

=== Week 11: 12 Jun - 16 Jun ===
'''Biocircuits: Mon, 10a-12p'''
* Shan Huang (rotation)
* Namita Sarraf (rotation)
| width=25% |

=== Week 12: 19 Jun - 23 Jun ===
'''Summer'''
|}

Group Schedule, Spring 2017

2017-05-08T17:58:46Z

Wpoole: /* Week 7: 15 May - 19 May */

This page contains information about various upcoming events that are of interest to the group. __NOTOC__
{| width=60%
|- valign=top
| width=50% |
* {{RMM public schedule|Richard's calendar (travel)}}
| width=50% |
* [[Group Schedule, Winter 2017]]
|}

The schedule for group and subgroup meetings is given below. Contact Anandh if you need to change the schedule. Unless otherwise noted, here are the locations of the meetings:

:{| width=100%
|- valign=top
| width=30% |
* Group meetings - 213 ANB
| width=30% |
* Biocircuits subgroup - Keck 111
| width=30% |
* NCS subgroup - 243 ANB
|}

{| width=100% border=1

|- valign=top
| width=25% |
=== Week 1: 3 Apr - 7 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* Leo Green
* Ania Baetica

| width=25% |

=== Week 2: 10 Apr - 14 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* Vipul Singhal
* George Artavanis

'''Biocircuits: Wed, 11a-12p'''
* Lab cleanup

| width=25% |

=== Week 3: 17 Apr - 21 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* Yong Wu
* Mark Prator

'''DARPA Biocon: Wed, 12p-2p'''

|- valign=top
| width=25% |

=== Week 4: 24 Apr - 28 Apr ===
'''Biocircuits: Mon, 10a-12p'''
* James Parkin
* Shaobin Guo (Pre-defense talk)

| width=25% |

=== Week 5: 1 May - 5 May ===
'''Biocircuits: Mon, 10a-12p'''
* Sam Clamons
* Andrey Shur

| width=25% |

=== Week 6: 8 May - 12 May===
'''Biocircuits: Mon, 10a-12p'''
* Anandh Swaminathan
* Cindy Ren

|- valign=top
| width=25% |

=== Week 7: 15 May - 19 May ===
'''Biocircuits: Mon, 10a-12p'''
* Reed McCardell
| width=25% |

=== Week 8: 22 May - 26 May ===
* RMM in town, no group meeting

'''DARPA Biocon: Wed, 12p-2p'''

| width=25% |

=== Week 9: 29 May - 2 Jun ===
'''Happy Memorial Day!'''

|- valign=top
| width=25% |

=== Week 10: 5 Jun - 9 Jun ===
'''Biocircuits: Mon, 10a-12p'''
* Rotation student
* Andy Halleran

| width=25% |

=== Week 11: 12 Jun - 16 Jun ===
'''Biocircuits: Mon, 10a-12p'''
* Shan Huang (rotation)
* Namita Sarraf (rotation)
| width=25% |

=== Week 12: 19 Jun - 23 Jun ===
'''Summer'''
|}

Apr 2017 meeting schedule

2017-04-12T17:45:14Z

Wpoole: /* 21 Apr (Fri) */

Richard will be in town 19-21 Apr. Please sign up for a time to meet below. __NOTOC__

{| border=1
|- valign=top
| width=25% |
==== 19 Apr (Wed) ====
* 9:30 am: Hold (Sofie or Leo)
* 10:30 am: Admin meeting (SP, MC)
* 11:15 am: Shaobin
* 12:00 pm: DARPA BioCon meeting
* 2:00 pm: Candidacy exam
* 3:00 pm: CDS tea
* 3:45 pm: Yong
* 4:30 pm: Admin meeting (LL)
* 5:00 pm: Open (tentative)
* 5:45 pm: Associates event

| width=25% |

==== 20 Apr (Thu) ====
* 9:30 am: Hold (Sofie or Leo)
* 10:30 am: Mark
* 11:15 am: Tony Fragoso
* 12:00 pm: Lunch
* 1:30 pm: EBRC telecon
* 2:30 pm: Anandh
* 3:15 pm: James
* 4:00 pm: Vipul
* 4:45 pm: Break
* 5:00 pm: Tung
* 5:45 pm: Sam
* 6:00 pm: Open (if needed)
* 6:45 pm: Open (if needed)
* 7:30 pm: Done for the day

| width=25% |

==== 21 Apr (Fri) ====
* 9:15 am: Open
* 10:00 am: JPL CIF meeting
* 11:15 am: Karena
* 12:00 pm: Lunch
* 12:45 pm: William
* 1:30 pm: Namita
* 2:15 pm: Open
* 3:00 pm: Break
* 3:15 pm: Open
* 4:00 pm: Miki
* 4:45 pm: Open
* 5:30 pm: Done for the day

| width=25% |

==== 23 Apr (Sun) ====
* 1:45 pm: Open
* 2:30 pm: Open
* 3:15 pm: Open
* 4:00 pm: Break
* 4:15 pm: Open
* 5:00 pm: Open
* 5:45 pm: Shan
* 6:30 pm: Done for the day
|}

Mar 2017 meeting schedule

2017-02-28T00:28:10Z

Wpoole: /* 3 Mar (Fri) */

Richard will be in town 3-7 Mar. Please sign up for a time to meet below. __NOTOC__

{| border=1
|- valign=top
| width=25% |
==== 3 Mar (Fri) ====
* 10:00 am: DENSO CPM telecon
* 11:00 am: Reed
* 11:45 am: Shaobin
* 12:30 pm: Lunch
* 1:00 pm: Hold: DARPA telecon
* 2:00 pm: Vipul
* 2:45 pm: Mark
* 3:30 pm: SBIR telecon (w/ Mark P)
* 4:00 pm: Faculty meeting
* 5:45 pm: William
* 6:30 pm: Done for the day

| width=25% |

==== 5 Mar (Sun) ====
* 1:45 pm: Anandh
* 2:30 pm: Open
* 3:15 pm: Sam
* 4:00 pm: Break
* 4:15 pm: Open
* 5:00 pm: Open
* 5:45 pm: Sumanth Dathathri
* 6:30 pm: Done for the day

| width=25% |

==== 6 Mar (Mon) ====
* 9:30 am: AFOSR BRI telecon
* 10:30 am: Yong
* 11:15 am: Fragoso
* 12:00 pm: Lunch
* 12:30 pm: Hold: DARPA telecon
* 1:30 pm: Richard C
* 2:15 pm: Ioannis
* 3:00 pm: Miki
* 3:45 pm: Break
* 4:00 pm: James
* 4:45 pm: Karena
* 5:30 pm: Ania
* 6:15 pm: Done for the day

| width=25% |

==== 7 Mar (Tue) ====
* 9:30 am: Busy
* 10:15 am: Tung
* 11:00 am: Hold: DARPA telecon
* 12:00 pm: Lunch
* 12:45 pm: Hold
* 1:15 pm: Andrew M
* 2:00 pm: Andy Halleran
* 2:45 pm: Depart for airport
|}

Jan 2017 meeting schedule

2017-01-13T19:29:45Z

Wpoole: /* 23 Jan (Mon) */

Richard will be in town 20-24 Jan. Please sign up for a time to meet below. __NOTOC__

{| border=1
|- valign=top
| width=25% |
==== 20 Jan (Fri) ====
* Richard arrives on campus ~9:45 am
* 10:15 am: Mark
* 11:00 am: Yong
* 11:45 am: Anandh
* 12:30 pm: Lunch
* 1:30 pm: Yong and Frances A
* 2:30 pm: Sumanth Dathathri
* 3:15 pm: Reed
* 4:00 pm: Miki
* 4:45 pm: Break
* 5:00 pm: Cindy
* 5:45 pm: Open
* 6:30 pm: Done for the day

| width=25% |

==== 22 Jan (Sun) ====
* 1:45 pm: Open
* 2:30 pm: Open
* 3:15 pm: Rory
* 4:00 pm: Break
* 4:15 pm: Open
* 5:00 pm: Open
* 5:45 pm: Open
* 6:30 pm: Done for the day

| width=25% |

==== 23 Jan (Mon) ====
* 8:00 am: Michaelle
* 9:00 am: Hold: Jaymie
* 10:00 am: BioCon meeting
* 12:00 pm: Seminar ([[Michaëlle Mayalu, Jan 2017|Michaelle]])
* 1:00 pm: Hold until needed
* 1:45 pm: Open
* 2:30 pm: CDS faculty meeting
* 4:15 pm: Tony Fragoso
* 5:00 pm: Ania
* 5:45 pm: William
* 6:30 pm: Dinner with visitors

| width=25% |

==== 24 Jan (Tue) ====
* 9:45 am: Henrike
* 10:30 am: Karena
* 11:15 am: Tung
* 12:00 pm: Seminar ([[Henrike Niederholtmeyer, Jan 2017|Henrike]])
* 1:15 pm: [[Michaëlle Mayalu, Jan 2017|Michaelle]]
* 2:00 pm: Anu
* 2:45 pm: [[Henrike Niederholtmeyer, Jan 2017|Henrike]]
* 3:30 pm: Depart for airport
|}

Sep/Oct 2016 meeting schedule

2016-09-19T02:45:56Z

Wpoole: /* 3 Oct (Mon) */

Richard will be in town 29 Sept - 3 Oct 2016. Please sign up for a time to meet below.
__NOTOC__

{| border=1
|- valign=top
| width=25% |
==== 29 Sep (Thu) ====
* Flying in from SF in the morning
* 1:00 pm: George
* 1:45 pm: Andrey
* 2:30 pm: Tony Fragoso
* 3:15 pm: Break
* 3:30 pm: Richard C.
* 4:15 pm: Sam
* 5:00 pm: Open
* 5:45 pm: Break
* 6:00 pm: Open
* 6:45 pm: Open
* 7:30 pm: Done for the day
| width=25% |

==== 30 Sep (Fri) ====
* Morning: busy with other meetings/phone calls
* 1:30-3:30 pm: Integrase project meeting (Victoria, Andrey, George, Sam, Ania, Cindy, Jining)
* 3:30 pm: Miki
* 4:30 pm: break
* 4:45 pm: Open
* 5:30 pm: Anandh
* 6:15 pm: Done for the day
| width=25% |

==== 2 Oct (Sun) ====
* 1:45 pm: YONG
* 2:30 pm: Open
* 3:15 pm: Open
* 4:00 pm: Break
* 4:15 pm: Cindy
* 5:00 pm: Open
* 5:45 pm: Open
* 6:30 pm: Done for the day

| width=25% |

==== 3 Oct (Mon) ====
* 10 am - 12 pm: DARPA BioCon meeting
* 12:00 pm: Candidacy exam
* 1:45 pm: Jaymie
* 2:45 pm: Tung
* 3:30 pm: Open
* 4:15 pm: Victoria
* 5:00 pm: Break
* 5:15 pm: Hold: Daniel N
* 6:00 pm: William
* 6:45 pm: Open
* 7:30 pm: Done for the day
|}